Interactive 3D

1 / 3

EVC30036

Collapsible Pop-Up Tray with Attached Lid

Available in a wide range of custom configurations & material selection.
Order 1 sample. Or order 100K+ units. Or anything in between.
Affordable delivery across North America.
Design support, warehousing, testing, assembly available.
Widest machinery capability in America via 30+ specialist partner plants.

Get pricing

Free white-glove consultations. Blazing-fast response time. Fast quotes.

Product details

Top highlights

Pops open for fast manual packing
Rolled top edges hide raw corrugated flutes
Delivered flat with pre-glued corners

About this product

The EVC30036 is a premium corrugated tray that ships flat and pops open at the packing station. Designed with pre-glued webbed corners and an attached tuck-in lid, it eliminates the need for complex manual folding or tape during assembly.

To create a high-end unboxing experience, the top edges of the tray fold inward 180 degrees, hiding the raw corrugated flutes. This makes it a strong choice for apparel, electronics, and retail presentations where appearance and packing speed matter more than using a simple unglued mailer.

Common uses

Apparel and boutique retail
Electronics and tech accessories
Subscription boxes (inside an outer shipper)
High-end kitting and fulfillment

Get a quote

Share what you know. We'll take it from there. Or email us at info@herculeindustrial.com

Describe your project *

Approximate quantity *

Size if known

Files or competing quote (optional)Drag files here or choose filesAdd drawings, photos, dielines, quotes, specs, or other useful files.Max 5 files, 25 MB total.

Name *

Email *

Phone

Optional

More details

You can skip this whole part, or open a section and answer only what you know.

Size and quantity

Detailed dimensions

Units US customary (inches)Metric

What do your dimensions describe?

Internal length

Internal width

Internal depth

Size notes

Quantity notes

Materials and print

Material or strength preference

Add details for material or strength preference

Material or strength details

Print and artwork

Add details for print and artwork

Print, finish, or artwork details

Shipping or storage context

Custom changes or unusual needs

How will this tray be sealed or shipped?

Will you be using custom inserts or foam inside the tray?

How will these be packed?

Current box or specs

Do you have a current box, spec, or target sample?

Add details for do you have a current box, spec, or target sample?

Current box, known specs, or current problem

Destination ZIP or region

Company

Any deadline or timing constraint?

Premium Retail and Kitting Applications

High-End Retail and Apparel

The hidden flutes on the top edges give this tray a polished, finished look similar to a rigid setup box, but it ships flat to save space. It is frequently used for clothing, accessories, and boutique items.

Fast-Paced Manual Kitting

Because the webbed corners are pre-glued by the converter, the packer simply pulls the walls up and locks the front panel into place. This reduces assembly time compared to standard roll-end mailers.

Corporate Gifting and Promotional Kits

The attached lid and clean interior edges create a strong presentation for promotional items. The fast assembly allows teams to pack large volumes of gift kits quickly without tape.

Retail Display and Shelf Ready

With the lid tucked in or folded back, the clean front and side edges make this tray suitable for direct retail display, keeping products organized while maintaining a premium appearance.

Fulfillment Centers and Boutique Brands

Subscription and E-commerce Brands

Brands looking to upgrade their unboxing experience use this tray for its clean presentation. However, because the tuck lid is not inherently tamper-evident, it is often placed inside a master shipper or sealed with a heavy-duty label for parcel transit.

High-Volume Fulfillment Operations

For operations that rely on manual assembly, the labor savings on the packing line often make the pre-glued format a better choice than a standard flat mailer.

Third-Party Logistics (3PL) Providers

For 3PLs managing complex kitting projects, the pop-up design reduces training time and speeds up the packing line, making it easier to meet tight fulfillment deadlines.

When to Consider Standard Mailers or Open Trays

Trial and Prototype Programs

This design relies on pre-glued webbed corners and rolled edges. For very short runs or prototype testing, a standard unglued mailer is often easier to source and test before committing to a final format.

Heavy-Duty Transit Needs

The single-thickness back wall and simple tuck lid are designed for presentation, not rough handling. If the primary goal is shipping through a mixed-carrier network without an outer box, a heavier-duty shipping mailer is worth comparing.

Board Choice, Transit Routing, and Fit

Board Thickness and Flute Profile

This design relies on 180-degree folds to create the clean top edges. Thick corrugated board will crack under this tension. E-flute or thinner micro-flutes are often chosen to ensure the flaps fold flat and the tray remains square.

Closure and Sealing Strategy

The attached lid uses a simple friction tuck. Decide whether your route may need a clear wafer seal, a branded sticker, or placement inside a larger shipping carton to keep the lid secure during transit.

Internal Clearance for Inserts

The rolled edges add thickness to the side and front walls. If you are using custom inserts or foam, the internal dimensions must account for this extra material to ensure a proper fit.

Print Surface and Graphic Layout

Because the top edges fold inward, the exterior printed liner becomes visible on the inside rim of the tray. This allows for continuous branding from the outside to the inner edge without requiring double-sided printing.

Adjusting the Lock, Lid, and Flap Clearances

Locking Tab Configuration

The front inner panel uses tabs that lock into the base. The number and width of these tabs can be adjusted based on the tray's overall length and the stiffness of the chosen board.

Lid Tuck Depth

The depth of the front tuck flap can be extended for a tighter friction fit or shortened if the tray will be sealed with a label.

Rollover Flap Height

The side rollover flaps are typically partial-height to provide a clean edge without interfering with the base. This height can be adjusted to balance appearance and material usage.

Packing details

Pre-Glued Delivery

The side rollover flaps and the webbed corners are glued before delivery. The front locking flap is left unglued so the packer can engage it during final assembly.

Additional notes

Packing line speed versus pre-glued delivery

This tray relies on pre-glued delivery to enable much faster manual packing. It is often chosen when labor time is the primary bottleneck.

FAQs

Is tape or glue needed to assemble this tray?

No. The corners are pre-glued before delivery. At the packing station, you simply pull the walls up and fold the front panel down to lock the tray rigid.

Can I use thick corrugated board for this design?

It is not advised. The clean top edges rely on the board folding 180 degrees flat against itself. Thick flutes often crack or bind, so E-flute or thinner materials are generally a better fit.

Is this box secure enough to ship via parcel carriers?

On its own, the tuck lid may open during transit. For parcel shipping, it usually benefits from a strong adhesive seal or placement inside a master shipping carton.

How does the pre-glued format change production?

It involves folding the side edges and gluing the webbed corners before it is delivered to you flat, which can make it less practical for very small trial runs compared to an unglued mailer.

Does the rolled edge take up interior space?

Yes, the folded edges add thickness to the side and front walls. The internal clearance must be calculated carefully to ensure your product or inserts still fit.

Can I get a short run of these for testing?

While digital cutting tables can cut the shape, the complex gluing is difficult to do by hand at scale. Prototypes are useful for checking fit, but larger runs are usually needed to justify the automated gluing process.

How does the rolled edge affect printing?

The rolled edges bring the exterior printed liner to the inside rim of the tray. This allows you to have a branded interior edge without paying for double-sided printing.

Can I use custom inserts with this tray?

Yes, but the insert must be sized to clear the folded-over edges and the front locking tabs. The internal dimensions will be slightly smaller than a standard tray of the same outer size.