A freestanding, six-piece retail display rack designed for semi-permanent merchandising. Built from rigid materials like inverted corrugated board (ICB) or honeycomb, it relies entirely on deep intersecting slots and slide-in friction fits, requiring no hardware or adhesives for assembly.
The open-front structure provides three accessible tiers for stacked or boxed goods, making it a strong fit for retail floors, showrooms, and pop-up shops where quick setup and a clean presentation matter.
Provides an accessible, multi-tiered presentation for stacked goods, boxed products, or folded apparel on the store floor.
Showroom and trade show displays
Offers a clean, semi-permanent fixture that can be transported flat and assembled on-site without specialized tools.
Pop-up shop merchandising
Allows for quick deployment in temporary retail spaces where bringing in heavy wood or metal fixtures is impractical.
Boxed product stacking
Shelf span and board thickness can be matched to the product weight when planning multi-tiered presentations.
Brand Rollouts and Trade Shows
Brand rollouts and pop-up shops
Allows brands to deploy consistent, freestanding shelving across multiple locations without relying on existing store fixtures.
Trade show and event marketing
Helps exhibitors set up lightweight, flat-packing furniture quickly without requiring tools or specialized labor.
Showroom product staging
Provides wholesale environments with clean, semi-permanent shelving for seasonal collections or new product lines.
When to Consider Bins or Header Displays
Displays requiring top branding
This rack features a flat top. If the campaign requires a prominent branded header, review displays that include an integrated top billboard panel.
Contained base requirements
The bottom shelf is open. If products are prone to sliding or require a contained bin at the floor level, a tray-base display may be a better fit.
Board Thickness and Print Surfaces
Board thickness and edge finish
This structure is typically cut from 16mm ICB or honeycomb board. Because the edges are exposed after routing, decide whether the raw core fits the presentation or if edge banding is necessary.
Double-sided print requirements
The open-front structure means the interior side walls and the undersides of the shelves are visible to shoppers. Double-sided printing ensures a fully branded presentation.
Outer transit packaging
The display components pack completely flat, but they require a separate, durable corrugated outer shipper to protect the rigid corners during freight or parcel transit.
Shelf load and span testing
Determine if the product weight requires a thicker board or a narrower shelf span to manage deflection over time.
Shelf Spacing and Overall Dimensions
Shelf clearance
The vertical distance between shelves can be adjusted to match specific product heights.
Overall width and depth
The footprint can be scaled, but wider shelves increase the span and should be tested with the actual product weight.
Shelf overhang
The distance the shelves protrude past the front of the side walls can be adjusted for aesthetic preference or to create a deeper presentation area.
Packing details
Slot tapers for assembly
The routed slots feature slight tapers at the openings. This helps store staff guide the thick board into place without crushing the edges during setup.
Additional notes
Store staff assembly time
While tool-free, aligning the long vertical slots of the rear wall with the side walls requires care. It is often assembled by two people or laid on its back during the first step.
Review this option if different product heights require a different shelf count or spacing logic.
FAQs
Does this display require tools or clips to assemble?
No. The rear wall drops over the side walls, and the three shelves slide in horizontally. The entire structure locks together through friction and intersecting slots.
How is this display shipped to stores?
The six components pack completely flat. Because the rigid board is heavy and the corners are vulnerable, the flat components must be packed inside a separate corrugated master shipper.
How much weight can the shelves hold?
Capacity depends entirely on the chosen board material (like 16mm honeycomb) and the overall width of the display. Wider shelves may bow under heavy loads and should be prototyped with the actual product.
Which panels can be printed?
All six components can be printed. Because the rack is open, the undersides of the shelves and the inside faces of the side walls are visible, making double-sided printing a common choice.
Can the shelf spacing be adjusted after assembly?
No. The slots are routed into the side walls at fixed intervals. If you need adjustable heights, the template must be modified before production.
What materials are suitable for this rack?
It requires rigid materials like 16mm inverted corrugated board (ICB) or honeycomb board. Thin corrugated may crush at the interlocking joints and may not support the shelves.
Do I need edge banding for the exposed board?
It depends on the presentation. The routed edges will expose the inner core of the board. Some brands prefer this raw look, while others request edge finishing for a premium appearance.
Can this display be shipped fully assembled?
No. It is designed to ship flat to save freight space and reduce joint damage risk. Store staff assemble it on-site.
Configure the shelf spacing and overall footprint to match your product lineup.
