Retail Floor and Counter Displays
Retail dump bins
A practical choice for loose, lightweight merchandise, seasonal promotions, or impulse buys. The rolled edge presents a finished look to shoppers while reinforcing the opening against bending.
Temporary collection bins
Useful for event recycling or lightweight collection where a clean appearance matters more than long-term durability.
Seasonal promotional rollouts
Provides a large, visible footprint for holiday-specific bulk items that need to be placed quickly on the store floor and removed after the event.
Endcap or aisle-blocker displays
The tapered shape allows the bin to sit securely at the end of an aisle, holding high-traffic goods without requiring permanent shelving.
Point-of-Purchase and Promotional Rollouts
Store-level promotional rollouts
Designed to ship flat to individual retail locations. Store staff can assemble the bins without tools, tape, or specialized training.
High-graphic promotions
The 180-degree top fold means the exterior print naturally wraps over the rim and down into the upper interior, providing a premium look without requiring two-sided printing.
Fast-moving consumer goods (FMCG) campaigns
Allows brands to bypass standard shelf space by placing bulk quantities of lightweight packaged goods directly in the shopper's path.
Heavy Payloads and Parcel Shipping
Heavy or dense industrial parts
Snap-lock and crash-lock bases can sag or fail under heavy, concentrated weight. If displaying dense goods, look at a reinforced pallet bin or a display with a separate load-bearing floor pad.
Courier and parcel transit
This is an open-top display, not a shipping container. Goods must be shipped to the store in separate outer master cartons.
Base Strength, Print Layout, and Assembly Speed
Base style and store-level assembly labor
The standard template uses a manual snap-lock bottom. For large rollouts where store staff time is limited, a pre-glued auto-bottom variant speeds up assembly.
Print panel placement
Because the top flaps fold inward, artwork intended for the upper inside rim should be printed on the outside of the flat blank.
Board thickness and fold clearance
The rolled top edge requires precise double-crease spacing. Changing from a thin E-flute to a thicker C-flute requires adjusting these clearances so the rim locks cleanly without cracking.
Base reinforcement for product weight
If the intended merchandise is heavy, discuss adding a separate corrugated floor pad to distribute the weight across the base flaps and prevent sagging.
Taper Ratios and Top Rim Clearances
Taper angle and footprint
The ratio between the top opening and the base width can be adjusted to change the bin's profile, though sharp tapers may affect how flat the bin folds for shipping.
Overall height
Can be scaled for tall floor displays or shorter counter-top units, depending on the merchandise volume and available retail space.
Top rim slot width
The slots that receive the locking tabs must be sized to match the exact board caliper, ensuring the rolled edge stays securely locked during use.
Packing details
Blank size and machine limits
Very large single-piece dump bins can exceed standard die-cutting equipment limits. Splitting the design into two pieces allows for oversized floor displays while reducing corrugated waste.
Single-Piece vs. Two-Piece Construction
EVC62188 (Single-Piece Manual Base)
The standard approach for small to medium bins, featuring a manual 1-2-3 snap-lock bottom.
EVC62188a (Two-Piece Auto-Bottom)
Splits the bin into two glued halves with a pre-glued crash-lock base. This allows for oversized floor displays and faster store-level setup.
Additional notes
Inside rim visibility
The 180-degree fold-over top means the outside liner board is visible on the upper inside of the bin. This allows for continuous branding around the opening without the cost of two-sided printing.
Related Display and Bin Formats
FAQs
Can this bin hold heavy items like hardware or beverages?
The base relies on interlocking or glued flaps rather than a solid floor. Heavy, dense items may cause the bottom to sag or open unless supported by a pallet or reinforced with a separate base pad.
Does the bin require tape for assembly?
No. The side seams are glued during manufacturing. Store staff assemble the bin by locking the bottom flaps and folding the top rim into place.
How does the rolled top edge stay in place?
The top panels fold 180 degrees inward and feature small locking tabs that push into pre-cut slots along the inner rim, holding the double-wall edge securely.
Do I need two-sided printing to have graphics on the inside rim?
No. Because the top flaps fold inward, the exterior print surface becomes the upper interior wall. Full interior printing is only needed if graphics must extend all the way to the bottom of the bin.
Why would I choose the two-piece variant?
A large floor bin cut from a single piece of corrugated board can waste material and exceed machine size limits. The two-piece variant solves this while adding a pre-glued base for faster retail setup.
Can the taper angle be changed?
Yes, the top and bottom widths can be adjusted independently. However, sharp tapers must be checked to ensure the bin still folds flat for shipping without binding.
Can I ship products inside this bin?
No. This is an open-top display bin, not a shipping container. The bin ships flat to the retail location, and the merchandise must be shipped separately in master cartons.
How can I prevent the bottom from sagging under moderate weight?
Adding a separate corrugated floor pad inside the bin helps distribute the product weight evenly across the interlocking base flaps, reducing the risk of the bottom bowing outward.
