Hercule Industrial logoHercule Industrial
Interactive 3D
1 / 3

ICB10080

Two-Tier Slanted Shelf Floor Display

The ICB10080 is a freestanding, rigid-board retail floor display designed to present products face-forward on two angled tiers. Built from thick honeycomb or inverted corrugated board, it offers a premium, architectural look for retail environments.

Instead of individual flat shelves, this display uses a single continuous board folded into a zig-zag profile. This shelf unit slides into angled slots on the main body, locking the display together without tape, glue, or tools.

Get a quote
  • Order custom samples, short runs, or production runs.
  • US-based. Nationwide service.
  • Nationally competitive pricing & delivery costs.
  • Available in a wide variety of configurations.

At a glance

  • Two slanted tiers for face-forward product presentation
  • Tool-free, slot-and-tab assembly from six flat components
  • Designed for thick rigid boards and CNC routing

Get a quote

Share what you know. Exact specifications can follow. Or email us at info@herculeindustrial.com

Optional

More details

You can skip this whole part, or open a section and answer only what you know.

Size and quantity
Units
Materials and print
Add details for display board preference
Add details for print and artwork
Current box or specs
Add details for do you have a current box, spec, or target sample?

Retail Presentation and Product Fit

Media and Publications

The slanted shelves are a natural fit for books, magazines, comic books, and calendars, keeping the covers fully visible to browsing shoppers while gravity holds the items against the backrest.

Flat Boxed Goods

Software, electronics accessories, or cosmetics packaged in flat cartons present well on an angle. The front retention lip keeps smooth boxes from sliding off the shelf.

Greeting Cards and Stationery

The angled presentation allows multiple overlapping rows of flat paper goods to remain visible without falling forward.

Lightweight Apparel

Flat-packed shirts or accessories in rigid sleeves can be stacked on the slanted tiers for a clean, face-forward retail presentation.

Premium Retail Environments

Boutique and Specialty Retail

Because this display relies on thick rigid board and CNC routing, it provides a more permanent, fixture-like appearance than standard corrugated dump bins. It fits well in environments where presentation quality matters.

Campaigns Requiring Flat Shipping

Despite its size when assembled, the display breaks down into six flat components. This allows it to be shipped knocked-down on pallets to distribution centers or individual stores.

Pop-Up Shops and Events

The tool-free, slot-and-tab assembly allows event staff to erect the display quickly on-site without needing adhesive or specialized hardware.

When to Consider Different Display Styles

Heavy Point Loads

If you are displaying heavy items like beverages, canned goods, or hardware, a slanted shelf may sag over time or tear out the side-wall slots. Compare with flat-shelf displays that feature reinforced vertical load-bearing columns.

Standard Corrugated Campaigns

This display requires CNC routing of premium thick board. For campaigns requiring standard die-cut corrugated board, a different display style may be a better fit, though it will lack the architectural rigidity of thick honeycomb board.

Material, Routing, and Assembly Choices

Board Thickness and Slot Tolerances

The entire assembly relies on friction-fit slots. The display file must be updated with the measured thickness of your chosen board. If the board thickness changes, the slot widths must be recalculated, or the display will not assemble.

Edge Finishing

Thick honeycomb or ICB boards leave an exposed, textured edge when cut. Decide whether this raw edge fits your brand aesthetic or if edge-banding or wrapping is required for a cleaner finish.

Print and Branding Surfaces

The large side walls, header card, and front lips offer ample billboard space. The flat components are well-suited for direct-to-board digital printing before routing.

Shelf Angle and Product Retention

The shelf angle works for most media, but steep angles combined with smooth packaging can cause products to slip. Testing the physical product on the shelf is necessary to confirm the angle and lip height.

Display Adjustments

Shelf Width and Depth

The overall width of the display and the depth of the slanted shelves can be adjusted to fit your product. However, greatly widening the shelves increases the risk of center sag and should be tested with actual product weight.

Header Profile

The top edge of the header card can be custom-contoured to match brand logos or campaign themes, provided the bottom insertion tabs remain aligned with the side walls.

Front Lip Height

The separate paper rest component that forms the front lip can be extended vertically to accommodate thicker books or multiple stacked items.

Packing details

In-Store Assembly Realities

While the display requires no tools, aligning the continuous zig-zag shelf unit into the angled slots of both side walls simultaneously requires care. Clear, step-by-step visual instructions should be provided to retail staff to prevent forcing or damaging the slots.

Additional notes

CNC Routing vs. Die-Cutting

Because thick rigid board can crush under standard steel-rule dies, this display is typically manufactured using CNC flatbed routing. This digital cutting method changes how the display is produced and planned compared to standard corrugated bins.

Base Stability

The separate footer panel acts as a kickplate at the bottom front of the display. It is necessary for preventing the side walls from splaying outward under the weight of the loaded shelves.

Related Floor Displays

ICB10005: Multi-Tier Dump Bins

Worth evaluating if the product is loose, irregularly shaped, or better suited for bulk presentation rather than neat, face-forward stacking.

FAQs

Does this display require glue or tape to set up?

The display uses a slot-and-tab friction fit. The side walls fold forward, and the zig-zag shelf unit slides into angled slots, locking the display together without adhesive.

How does the display ship?

It ships knocked-down as a set of six flat components: the main body, the folded shelf insert, a header, a footer, and two front retention lips. It requires an outer shipper for parcel networks.

What material is this display made from?

It is designed for thick rigid boards, typically inverted corrugated board (ICB) or honeycomb board. This provides the necessary stiffness for the tall side walls and unsupported shelf spans.

Can this be made from standard corrugated board?

It is generally not recommended. Standard corrugated board may crush at the slot bearing points under load, and the display's mechanical strength relies on the rigidity of thick board.

Can I change the angle of the shelves?

While the angle can be adjusted in the CAD file, steep angles may cause products to tumble or compromise the interlocking slot geometry. The angle should be tested with your specific product.

How much weight can the shelves hold?

Weight capacity depends entirely on the chosen board grade and the width of the display. Because the shelves are supported only at the edges by the side-wall slots, heavy loads can cause center sag. Physical testing with your actual product is required.

Can the front retention lip be made taller?

Yes, the paper rest component can be extended vertically to hold thicker books or stacked flat boxes securely.

Are the exposed board edges visible?

Yes, because the display is routed from thick rigid board, the cut edges will show the internal honeycomb or inverted corrugated core unless edge-banding is applied.

A striking, architectural display for premium retail presentations. Ensure your board thickness is locked in before finalizing the fit.