Interactive 3D

1 / 3

ICB40021

Freestanding Rigid Board Display Wall

Available in a wide range of custom configurations & material selection.
Order 1 sample. Or order 100K+ units. Or anything in between.
Affordable delivery across North America.
Design support, warehousing, testing, assembly available.
Widest machinery capability in America via 30+ specialist partner plants.

Get pricing

Free white-glove consultations. Blazing-fast response time. Fast quotes.

Product details

Top highlights

Tool-less assembly using friction-fit locking gussets
Requires rigid board (typically 16mm) for V-cut 90-degree folding
Ships flat but requires oversized pallet handling due to blank size

About this product

The ICB40021 is a large-format, freestanding display wall designed for trade shows, retail backdrops, and temporary exhibition architecture. Built from thick rigid board like honeycomb or inverted corrugated board (ICB), it ships completely flat and assembles on-site without tools, tape, or glue.

Instead of complex folding, the structure relies on two large V-cut panels that fold into U-shapes and mate face-to-face. Separate slotted gusset clips slide into the edges to lock the halves together, creating a thick, stable pillar with large uninterrupted print surfaces.

Common uses

Trade show partitions
Pop-up shop visual anchors
Temporary exhibition architecture
Event wayfinding

Get a quote

Share what you know. We'll take it from there. Or email us at info@herculeindustrial.com

Describe your project *

Approximate quantity *

Size if known

Files or competing quote (optional)Drag files here or choose filesAdd drawings, photos, dielines, quotes, specs, or other useful files.Max 5 files, 25 MB total.

Name *

Email *

Phone

Optional

More details

You can skip this whole part, or open a section and answer only what you know.

Size and quantity

Detailed dimensions

Units US customary (inches)Metric

What do your dimensions describe?

Width

Height

Size notes

Quantity notes

Materials and print

Display board preference

Add details for display board preference

Display board details

Print and artwork

Add details for print and artwork

Print, finish, or artwork details

Shipping or storage context

Custom changes or unusual needs

Where will this display wall be set up?

How do you plan to print the graphics?

Do you need the exposed edges covered?

Current box or specs

Do you have a current box, spec, or target sample?

Add details for do you have a current box, spec, or target sample?

Current box, known specs, or current problem

Destination ZIP or region

Company

Any deadline or timing constraint?

Trade Show Partitions and Retail Backdrops

Trade show and exhibition partitions

Provides a lightweight, printable alternative to rented hard-wall booths. The flat-pack design reduces freight costs, while the tool-less gusset locks allow event staff to set up the wall quickly without specialized hardware.

Freestanding retail backdrops

Acts as a large visual anchor for pop-up shops or seasonal retail rollouts. The deep side returns give the wall a substantial, architectural presence rather than looking like a thin poster board.

Pop-up shop visual anchors

Creates immediate brand presence in temporary retail spaces. The thick rigid board construction offers a premium look that separates the space without requiring permanent construction.

Temporary event wayfinding and signage

Serves as a large, freestanding billboard for directing foot traffic at large events. The two-sided design allows for different directional graphics on each face.

Event Marketing and Temporary Architecture

Event marketing teams

Needs large billboard space that can be transported efficiently. The two-piece wall design allows for different graphics on the front and back, maximizing floor placement options and visual impact.

Retail fixture rollouts

Requires displays that store associates or regional teams can build safely. The friction-fit clips eliminate the need for screws or adhesives, keeping the installation process clean and straightforward.

Trade show booth designers

Looking for modular, printable architecture that avoids the high drayage and labor costs of traditional wood or metal booth construction.

When to Consider Shelved or Counter Displays

Need for product shelving

This module is a hollow pillar designed for visual impact and space division. If the display must hold heavy retail products, a structural shelving unit with dedicated load-bearing cross-bracing should be evaluated.

Small footprint requirements

The default 2.4-meter height requires a deep base and wide stance to prevent tipping. For tight retail aisles, a narrower floor stand or counter display is a safer choice.

Board Thickness, Print Area, and Base Stability

Rigid board selection and V-cut tooling

This design strictly requires thick rigid materials, such as 16mm honeycomb or inverted corrugated board, that can be V-cut on a CNC flatbed. Standard corrugated board will crush under this folding logic and cannot be used.

Pallet and freight planning

Even when shipped flat, the uncreased main panels are very large, often over 2.7 meters long. Freight must be planned around oversized pallets or dedicated transport.

Anti-tip and floor stability

While the deep side returns provide a stable footprint, high-traffic environments may require additional base weights or floor brackets to prevent the tall wall from tipping if bumped.

Edge finishing and exposed cores

Depending on the rigid board chosen, the exposed edges of the V-cuts and gussets will show the internal core, such as honeycomb cells. Edge-banding can be discussed if a completely solid look is required.

Footprint Scaling and Gusset Adjustments

Scaling height and depth

The overall height and width can be scaled, but taller walls require proportionally deeper side returns to maintain a safe center of gravity.

Calibrating slots for material thickness

If the board thickness changes, the V-cut depth and the width of the locking gusset slots must be precisely recalculated so the friction fit remains tight.

Gusset nesting for material efficiency

The small locking clips can often be nested into the waste areas of the large jumbo boards during cutting, optimizing material use.

Packing details

Two-operator assembly

Due to the sheer size of the 2.4-meter panels, folding the side returns and mating the two halves face-to-face generally requires two people and adequate floor space.

Print surface and registration

The large flat panels offer uninterrupted billboard space, but artwork registration must be carefully managed across the 2.7-meter length during large-format digital printing.

Additional notes

V-cut folding behavior

The V-cut process removes the inner core and liner, leaving only the outer printable liner to act as a hinge. This creates a sharp, clean 90-degree corner without the rounded bulge typical of standard corrugated folds.

FAQs

Can this wall be made from standard corrugated board?

No. The 90-degree corners rely on precise V-cuts that remove material without breaking the outer liner. Standard corrugated board will crush and fail. It requires rigid materials like honeycomb board or inverted corrugated board.

How do the two halves stay together without tape or glue?

The side returns of the two wall halves meet face-to-face, creating aligned notches. Separate U-shaped clips slide into these notches, clamping the halves together through friction.

Can the wall support heavy top loads or mounted monitors?

By default, this is a hollow visual display. While the vertical side returns offer high compression strength, mounting heavy monitors or bearing structural top loads requires internal cross-bracing or a different engineered frame.

How is this display shipped?

The components are delivered completely flat. However, because the main panels do not fold in half horizontally, they require oversized pallets for transport.

What happens if we change the board thickness?

Changing the material thickness requires a complete recalculation of the template. The V-cut depth and the width of the gusset slots must perfectly match the board caliper, or the wall will not lock together.

Is it easy to assemble on-site?

The locking mechanism is simple and tool-less, but the physical size of the panels means you will need ample clear floor space and at least two people to align and mate the halves safely.

Can we print different graphics on the front and back?

Yes. Because the wall is built from two separate main panels, each face can be printed with entirely different artwork before assembly.

Does the wall need to be anchored to the floor?

The deep side returns provide a stable freestanding footprint for normal use. However, in high-traffic retail or event spaces, adding internal base weights or floor brackets is a smart precaution against accidental bumps.